Computer Network Repair for Beginners

While computer network repair is not something most beginning computer users want to tackle, there are a few things you can check that are common causes why your computer network won't work. Sometimes, checking simple things can make your network start working again. You might be able to isolate the problem, making network repair less time-consuming, in the event you need an on-site computer repair technician. Most of the time, computer networks will use Windows programs or SQL servers.

Re-boot the System

The first thing to try is to re-boot the system. This means you need to turn off all the peripheral computers and the main computer or network server will need to be re-booted, (turned off and then turned back on). Don't forget to re-boot the router because sometimes, this will be your problem. After you have tried this approach, you might find the system will be working because sometimes, an electrical blip causes the network to have errors, when booting up. This process might take a few minutes.

Check the Connections

The next step for beginning network repair is to check the cabling connections. Sometimes, a connection can work itself loose if you accidentally bump a component. If you have a red "X" in the system tray, this could be the problem. When you are narrowing down problems in network repair, a loose cable can be the problem many times.

Check for Hardware Problems

Usually, the next step in troubleshooting your computer network repair will be to check the hardware and make sure there are not problems. You go to the "Control Panel", then "Device Manager" to see if there are any disabled network devices marked with a red "X". You might need to re-enable the device, if you see these signs. If there is no network device listed, you might have a problem with your network card. If these are not problems, the next step in network repair would be to perform the Windows Diagnostics.

Windows Diagnostics

To perform the Windows Diagnostics, you go to the system tray in the lower right hand corner screen of the computer that needs computer network repair. You will right-click on the red "X" that indicates no network connection and click on "Repair" or "Troubleshoot", depending on which version of software your system uses. This might clear up network problems, if software configuration problems exist. Avoiding computer repair by an on-site technician can mean trying these simple steps. Sometimes, you can't avoid the need of an experienced computer network repair technician to help you, however.

Online or Onsite Support

For this reason, there are some companies that have taken advantage of computer network repair support technicians that are on-call and they will often walk you through the steps we have just mentioned. The great thing about learning the basics of computer network repair is that you might be able to get your network working again very quickly without help. On the other hand, if you can't figure out what is wrong with these simple processes of network repair, save the more complicated tasks for a person that is experienced in computer repair and don't start messing with system configurations or settings. This can make the computer network repair process take longer, and cause more problems than it solves.

Click Here to Return to the TOP of computer network repair

Click Here to Return to Onsite Computer Repair Page

Click Here to Return to Computer Repair Home Page

New! Comments